Dell 2TB 7.2K RPM SATA 6Gbps Server Hard Drive (Cabled, Non-Hot-Plug)

The Dell SATA cabled drive is the high-capacity non-hot-plug option for PowerEdge tower servers with cabled SATA bays. It doubles per-drive storage over the 1TB variant.

Dell SATA 2TB Cabled Drive — Non-Hot-Plug Tower Server Storage

This drive targets entry and mid-range PowerEdge tower servers using direct-cabled SATA connections rather than hot-swap backplanes. The 2TB capacity at 7.2K RPM on the SATA 6Gbps interface is well-matched to backup target volumes, large file repositories, surveillance recording and long-term data archiving—workloads where sequential access rates matter more than random I/O. The server must be powered down to install or replace this drive. Dell certification covers both the embedded SATA controller and PERC RAID adapters in compatible tower platforms. Find compatibility details at the Dell website.

Maximising Capacity in South African Tower Servers

South African small and medium businesses that need to extend how long their tower server can operate before requiring storage expansion will benefit from the 2TB density. A four-bay PowerEdge T350 populated with four 2TB drives in RAID 5 yields approximately 6TB of fault-tolerant usable storage—sufficient for a mid-size office file server for several years. This is a compelling capacity proposition at SATA nearline pricing. Organisations running surveillance with multiple IP cameras will also find 2TB drives extend recording retention significantly over 1TB alternatives. The cabled non-hot-plug design is standard for the T150 and T350 tower platforms. The Dell SATA cabled drive is the correct specification for these platforms — not the hot-plug variants used in rack servers. Browse server storage in the Components section at Briggi Tech.

RAID Configuration Notes

The PowerEdge T350 supports up to four 3.5-inch cabled SATA drives through its embedded controller. RAID 5 across four drives provides excellent capacity efficiency at approximately 75% usable storage. RAID 10 provides better write performance at 50% usable capacity. For environments where a second drive failure during RAID 5 rebuild is a concern, RAID 10 is the safer choice. This cabled non-hot-plug variant is not interchangeable with hot-plug SAS or SATA drives used in rack server backplanes.